For those interested in playing QuakeWorld,
here are some basic steps to get started..
1. Download ezquake from http://ezquake.sourceforge.net/download/ (around 20 MB download).
2. Run the ezquake installer.
3. Open ezquake.exe or ezquake-gl.exe and first type
rate 50000 in the console
(this will maximize the data transfer rate.
4. Go to http://www.quakeservers.net/quakeworld/servers/pl=1/so=8/, choose any of the servers, and highlight and copy the address by pressing ctrl+c.
5. Go to the ezquake console and type /connect (ctrl+v) to paste the server address and connect.
6. Thats it. All your original NetQuake config commands will automatically be recognized by ezquake, so you can just connect and start playing
here are some basic steps to get started..
1. Download ezquake from http://ezquake.sourceforge.net/download/ (around 20 MB download).
2. Run the ezquake installer.
3. Open ezquake.exe or ezquake-gl.exe and first type
rate 50000 in the console
(this will maximize the data transfer rate.
4. Go to http://www.quakeservers.net/quakeworld/servers/pl=1/so=8/, choose any of the servers, and highlight and copy the address by pressing ctrl+c.
5. Go to the ezquake console and type /connect (ctrl+v) to paste the server address and connect.
6. Thats it. All your original NetQuake config commands will automatically be recognized by ezquake, so you can just connect and start playing
Comment