It's all about nothing really.

[QuakeRoot]

Shub-Niggurath has been extracted and released. Is she ever an odd model... for some reason Pepakura won't let me extract her full size; towering over everything - she's about the same average size as the other models now, but, still very cool.

I've decided not to release the Dog. It's a bit ridiculous, the teeth on the thing are objects within other planes, so their geometry in the game is literally floating between the bottom of their jaw and poking out of their mouth. Every tooth would have to be tediously reworked by the assembler (you, or me, or someone). I'll take a look at Capt. Bubs variant, I'm hoping it's different. If not.. no dog.

This has been a fun project, I'll leave them all on my site, to all those who enjoy Papercraft - let me know if you have any issues with the models, I can make most any change needed (within reason).

[talisa]

sweet

[QuakeRoot]

I never claimed to be an expert at this... but as I've gone along and reviewed some of the models - I did some of them bass-ackwards.

(Yes Talisa, I listen to feedback, the Scrag can now be assembled much quicker with less stress)

I've very carefully re-worked each Papercraft Model Pattern, and they are looking great - every model has been updated and uploaded to my site. They are more user friendly - & I was able to fix the Vore! I'm very happy about that. The Fiend and Hell-Knight are much more user friendly now as well (still... both are advanced projects for the average Papercraft fan).

The Vore was re-extracted and released.
The Shambler has been fixed.
The Player was extracted and released.

All I have now are the Dog and Shub-Niggurath, & I think that covers all the original models. I may pick a few models from the expansion packs... the Dragon would look pretty badass...

[talisa]

[QuakeRoot]

The Grunt model has been extracted.
This one was a lot more fun than I thought it would be.
Ran into some problems with the chest and back-plate, but made it work.

Download of course, from the same page.

[QuakeRoot]

The Knight model has been extracted. Download at the same location.

[talisa]

coolies

[QuakeRoot]

The Enforcer model has been extracted - same link. It's kinda cool actually.

[QuakeRoot]

The Fiend is now complete. This took several hours to complete, the Fiend (Demon) has a lot of parts... horns, back-cut knees, hooves etc.

To all those who attempt to build the Fiend, take your time, don't get frusterated, there are a lot of parts but it is do-able.

Get The Fiend Here.

[talisa]

earlier wanted to get the camera to make some pics,
but sadly it pointed out the thing is gone


it mustve gotten lost on vacation

[QuakeRoot]

printed and put together the scrag last night

some parts where kinda difficult to put together cuz of tiny flaps, but overall it wasnt very hard and i could make it in just a couple hours

you might wanna look into those tiny flaps though, and perhaps split the model into a couple more parts to be able to have bigger flaps.

overall it wasnt bad at all though, and quite easy

.

will make some pics later to show it

Minteresting. (The "M" was placed deliberately).
Please post a picture of the Scrag immediately. Or you will anger the gods. So many of them. SO... MANY.

That being said - all those fun tiny tabs? They're auto-generated by Pepakura, I have no control over their placement or their size (or do I...? I'll look a bit more into that but I doubt it). I'm going to try to unfold the rest of the models using options in Blender. I should have more power over the model and tabs.

I'm glad you enjoyed the Scrag, it is the simplest model (this statment isn't intended to offend, it's just a fact - it has the least polygons, & it's awesome), let me know how the Ogre goes.

[talisa]

printed and put together the scrag last night

some parts where kinda difficult to put together cuz of tiny flaps, but overall it wasnt very hard and i could make it in just a couple hours

you might wanna look into those tiny flaps though, and perhaps split the model into a couple more parts to be able to have bigger flaps.

overall it wasnt bad at all though, and quite easy

.

will make some pics later to show it

[QuakeRoot]

the shambler you made has problems

several parts are partially on one page and partially on another page, which results in these pieces getting split when printed

...crap.
I'll look into that.

& yes, I can extract the Capt Bubs dog.

[Syluxguy28O3]

nice.

[talisa]

the shambler you made has problems

several parts are partially on one page and partially on another page, which results in these pieces getting split when printed